A40 improvement works advance near Eynsham

A40 improvement works advance near Eynsham

Oxfordshire has started preparatory highway works near Eynsham and Cassington. The activity will support a new A40 park-and-ride junction, bus priority measures, and walking and cycling improvements, with main construction expected in spring 2027.


IN Brief:

  • Oxfordshire County Council has begun preparatory highway works between Eynsham Park and Ride and Cassington.
  • Initial activities include traffic island removal and utility diversions, with overnight lane closures and temporary traffic signals.
  • The scheme will connect the completed 850-space park-and-ride facility to the A40, with main construction expected to begin in early spring 2027.

Oxfordshire County Council has begun preparatory highway works on the A40 between Eynsham Park and Ride and Cassington, moving construction activity onto the existing carriageway ahead of major improvements planned for 2027. The works will prepare the route for a new junction serving the park-and-ride site, bus priority measures, and upgraded walking and cycling infrastructure.

The current phase follows earlier work beside the highway, including vegetation clearance, ecological mitigation, surveys, and utility diversions. Activity is now extending into the carriageway, where existing road features must be altered before the planned junction and associated infrastructure can be constructed.

Initial operations include removing traffic islands around Cuckoo Lane, the Tesco area, and the western side of Eynsham Roundabout. These changes form part of the preparation needed to modify the existing road layout. Further construction activity will follow as the programme progresses towards the new junction and other highway improvements.

Much of the work requiring lane closures is scheduled overnight, with planned working hours of 8pm to 5am from Monday to Friday. Temporary restrictions will allow construction teams to work within the highway while limiting the effect on daytime traffic. The council has advised road users that delays may occur and that alternative routes should be considered where appropriate.

Utility diversions will introduce additional traffic management from Monday 23 November. Gas infrastructure is being diverted between the Tesco area and Eynsham Roundabout, with temporary traffic signals required while the work takes place. Local information indicates that three-way signals will be installed to accommodate the activity.

Service diversions are a necessary part of highway reconstruction where existing underground infrastructure conflicts with proposed roads, junctions, drainage, or foundations. Gas mains and other buried assets must remain protected and operational while the road layout is changed, requiring the relevant utility companies to coordinate their work with the highway construction programme.

These operations also affect the sequence in which permanent construction can proceed. A proposed junction cannot necessarily be constructed over an existing service route without the required protection or diversion being completed. Surveys and investigations establish the location and condition of the infrastructure, allowing subsequent work to be planned around the confirmed constraints.

Managing excavation within a live highway introduces further requirements. Temporary lane arrangements must provide separation between construction activity and passing traffic, while equipment movements and deliveries need to be coordinated with the available working space. Overnight operations reduce exposure to peak traffic volumes but do not remove the need to maintain suitable access and traffic management.

The latest work forms part of a planned improvement programme covering approximately 3.5km between Eynsham Park and Ride and Cassington. Oxfordshire County Council agreed in October to progress this section following a review of the wider A40 programme and its construction costs.

The principal highway scheme will provide a new junction connecting the completed Eynsham park-and-ride facility to the A40. The site has approximately 850 parking spaces but requires the road connection before it can perform its intended transport role. The junction will therefore enable an existing transport asset to be brought into use.

Further improvements include bus priority measures, upgraded junctions and crossings, and infrastructure for walking, wheeling, and cycling. The council intends these changes to improve journey reliability and provide alternatives to private car travel along the corridor between west Oxfordshire and Oxford.

The broader A40 improvement programme has changed considerably since its earlier proposals were developed. The original plans included more extensive highway capacity improvements, but rising construction costs prompted a review of the programme between 2022 and 2023. A revised scheme was subsequently developed to retain core public transport and active travel improvements within the available funding arrangements.

Planning permission for the A40 Eynsham Park and Ride to Wolvercote scheme was granted on 30 June 2026. The consent establishes the planning basis for the wider proposals, but it does not mean that every element will proceed simultaneously. The current construction programme concentrates on the Eynsham-to-Cassington section.

Oxfordshire County Council has been working with Balfour Beatty on the programme, including reviewing construction sequencing and the preparatory activities required before main works can begin. The review considered utility diversions, the discharge of planning conditions, and other activities that must be completed ahead of substantial highway construction.

The council’s current programme anticipates main construction beginning in early spring 2027. The preparatory works now taking place should therefore be distinguished from the start of that principal construction phase, which will involve delivery of the new junction and permanent highway improvements.

Another element of the original programme, the Duke’s Cut improvements, remains paused while further work is undertaken to assess structural maintenance requirements, costs, and risks. That decision separates the current funded construction priorities from parts of the wider corridor scheme requiring additional investigation.

The A40 programme also includes projects that have already been completed. The Oxford North corridor improvements, Eynsham Park and Ride, and Access to Witney works form part of the broader investment programme, although the park-and-ride site still requires its new connection to the main road.

Funding has been assembled from several public sources, including Homes England’s Housing Infrastructure Fund and transport-related allocations. The revised construction approach reflects the need to manage the cost of a programme containing several connected but separately deliverable infrastructure projects.

The latest activity will require continued coordination between the highway contractor, utility companies, and the council as traffic management arrangements change. The authority has committed to providing advance information about upcoming works and restrictions as the construction sequence develops.

Traffic island removal and utility diversions will establish the conditions needed for the next stage of work. The immediate programme will continue through late November, with further preparatory activity expected before main highway construction begins in spring 2027. Delivery of the new junction will provide the connection required to bring Eynsham Park and Ride into operation.



  • A40 improvement works advance near Eynsham

    A40 improvement works advance near Eynsham

    Oxfordshire has started preparatory highway works near Eynsham and Cassington. The activity will support a new A40 park-and-ride junction, bus priority measures, and walking and cycling improvements, with main construction expected in spring 2027.


  • Volvo and Trimble integrate excavator machine control

    Volvo and Trimble integrate excavator machine control

    Volvo and Trimble are integrating guidance into excavator cab displays. Trimble Earthworks will operate through Volvo Co-Pilot on selected F-series excavators, with production planned for the first quarter of 2027.